český हिन्दी ภาษาไทย 中国 Dansk Deutsch English Español Français Italiano ελληνικά 한국의 magyar Malaysia Nederlands Português Român Slovenský Svenska Türkçe
Edition du : 06/02/2024 11:16

NEUTRALÈNE® D 312

SOLVENT FOR BITUMEN AND ASPHALTS DISSOLUTION

Laboratory controls

Guaranteed without chlorinated solvents

Optimized evaporation speed/flash point ratio

 

 

 

TYPICAL PHYSICO-CHEMICAL CHARACTERISTICS

CHARACTERISTICS

  STANDARDS

VALUES

UNITS

Appearance

  Visual

Liquid

-

Colour

  Visual

Colourless

-

Odour

  Olfactory

Characteristic

-

Density at 25°C

  NF EN ISO 12185

865

kg/m3

Refractive index

  ISO 5661

1.4970

-

Freezing point

  ISO 3016

-20

°C

Solubility in water

  -

0

%

Kinematic viscosity at 40°C

  NF EN 3104

0.98

mm²/s

Acid index

  EN 14104

< 0.1

mg(KOH)/g

Iodine index

  NF EN 14111

< 0.1

gI2/100g

Residual after evaporation

  NF T 30-084

0

%

Vapour pressure at 20° C

  NF EN 13016-1

> 0.1

hPa

PERFORMANCE CHARACTERISTICS

CHARACTERISTICS

  STANDARDS

VALUES

UNITS

KB Index

  ASTM D 1133

80

-

Evaporation rate

  -

19

min

Surface tension at 20° C

  ISO 6295

24.7

Dyne/cm

Breakdown voltage

  NF EN 60156156

60,000 

Volts

Corrosion of copper strip 100h at 40° C

  ISO 2160

1a 

Quote

FIRE SAFETY CHARACTERISTICS

CHARACTERISTICS

  STANDARDS

VALUES

UNITS

Flash point (closed vessel)

  ISO 2719

50

°C

Self-ignition point

  ASTM E 659

>230 

°C

Lower explosive limit

  NF EN 1839

0.6 

% (volume)

Upper explosive limit

  NF EN 1839

7

% (volume)

Content of explosive, oxidizing, flammable, highly or extremely flammable substances

  CLP Regulation

100

%

TOXICOLOGICAL CHARACTERISTICS

CHARACTERISTICS

  STANDARDS

VALUES

UNITS

Anisidine index

  NF ISO 6885

 <1

-

Peroxide index

  NF ISO 3960

 <1

meq(O2)/kg

TOTOX (anisidine index+2x peroxide index)

  -

<1

-

Content of CMR, irritants, corrosives substances

  CLP Regulation

%

Residual methanol content from transesterification

  GC-MS

%

Emissions of hazardous compounds, CMR, irritants, corrosive at 160°C.

  GC-MS

%

ENVIRONMENTAL CHARACTERISTICS

CHARACTERISTICS

  STANDARDS

VALUES

UNITS

Biodegradability

  OCDE 301

nm 

-

Vapour pressure at 20° C

  -

>0.1 

hPa

VOC content (Volatile Organic Compounds)

  -

100 

%

Sulphur content

  GC MS

%

Benzene content

  ASTM D6229

%

Total halogen content

  GC MS

 

%

Chlorinated solvents content

  -

 %

Content of compounds with PRP

  -

0

%

Content of compounds with ODP

  -

%

Carbon footprint, life cycle analysis.

  ISO 14040

nm 

Kg Carbon equivalent

 

APPLICATIONS

- Rinsing of extrusion lines for thermoplastic resins - Rinsing of inkwells in offset printing and flexography.
- Soaking and wading of stainless coating cylinders, photogravure, bar feed rollers.
- Elimination of labels on drums, containers, by spraying.
- Rag cleaning of stainless steel cylinders, glue coating, photogravure, inkwells.
- Rag cleaning of racks of printing and coating machines.
- Rag cleaning of resin depositing machines, of paint booths.
- Washing with turbines of tanks and mixers of resins, monomers and masterbatches.


NEUTRALENE D 312 is particularly recommended for cleaning with a rag or a brush, of presses and materials for depositing bitumen and for brightening and dissolving raw and semi-raw rubbers

 

PRECAUTIONS FOR USE

"Dangerous. Respect the precautions of use".

 

PRESENTATIONS

 

 

Keg 25 L

Safe solvents, without danger pictogram, substitutes and alternate organic sourced and plant-based solvents. solvent. solvents. Industrial solvents. Solvent suppliers. Solvent manufacturer. Degreasing solvents. Cleaning solvents. Ink solvents. Paint solvents. Resin solvents. Composite solvents. Seals strippers. Paint strippers. Removers Glue removers. Ink removers. Paint removers. New solvents. New solvent. Dichloromethane substitute. Methylene chloride substitute. ch2 cl2 substitute. Substitute solvents. CMR substitutes. Acetone substitute. NMP substitute. Polyurethanes solvent. Epoxy solvents. Polyester solvent. Adhesives solvent. Paints solvent. Resins solvent. Varnishes solvents. Elastomers solvents. Substitute solvents. Acetone substitution. Replace acetone. MEK substitute. MEK substitution. Replace MEK. Dichloromethane substitution. Replace dichloromethane. Methylene chloride substitution. Replace methylene chloride. Xylene substitute. Xylene substitution. Replace xylene. Toluene substitute. Toluene substitution. Replace toluene. CMR substitute. CMR substitution.

Drum 200 L

 

 

 

 

 

Container GRV 1000 L

 

Safe solvents, without danger pictogram, substitutes and alternate organic sourced and plant-based solvents. solvent. solvents. Industrial solvents. Solvent suppliers. Solvent manufacturer. Degreasing solvents. Cleaning solvents. Ink solvents. Paint solvents. Resin solvents. Composite solvents. Seals strippers. Paint strippers. Removers Glue removers. Ink removers. Paint removers. New solvents. New solvent. Dichloromethane substitute. Methylene chloride substitute. ch2 cl2 substitute. Substitute solvents. CMR substitutes. Acetone substitute. NMP substitute. Polyurethanes solvent. Epoxy solvents. Polyester solvent. Adhesives solvent. Paints solvent. Resins solvent. Varnishes solvents. Elastomers solvents. Substitute solvents. Acetone substitution. Replace acetone. MEK substitute. MEK substitution. Replace MEK. Dichloromethane substitution. Replace dichloromethane. Methylene chloride substitution. Replace methylene chloride. Xylene substitute. Xylene substitution. Replace xylene. Toluene substitute. Toluene substitution. Replace toluene. CMR substitute. CMR substitution.